DIGITAL
EXTRA!
Get exclusive
video on our
digital edition.
1 Hold a vertical upward position when the
helicopter starts to lose
its upward speed, start to
lean on the up-elevator
and negative pitch to snap
the model into the second
point.
THE
4;POINT
FLIP
3;is is the same action as point 1, but
in a downward motion
that requires pitch
correction and releasing
elevator to keep the
helicopter in a straight-down position. After
staying like this for a
second, enter point 4.
EN TER While starting in slow forward flight, make sure you
are in idle-up mode and pull slight up-elevator until you
briskly snap the model into a vertical position. You can hold
this position by making slight pitch changes.
4 While exiting point 3, pull up-elevator
and increase pitch to
snap the model back to
a straight-up hover/
forward flight position.
;en release elevator as
soon as the helicopter is
upright again.
